Sound but no picture, or picture but no sound
When one half of a channel plays and the other does not, the stream is arriving: the sound or the picture would not play otherwise. The missing half is a format your device cannot decode, a decoder that failed, or, for sound, a track or an output setting. A black screen with sound is most often a video format too heavy for the device, usually 4K or HEVC (H.265) on an older phone or TV box. A picture with no sound is most often a surround sound format that the device, the TV or the soundbar does not take. Both are usually fixed by changing how the player decodes, or by picking another version of the channel.
Sound, but a black screen
The usual causes, most likely first
- The video format is beyond the device. A 4K or HEVC channel needs a hardware decoder for that format. Older phones, older Fire TV Sticks and cheap TV boxes may have none, or one that handles 1080p HEVC and not 4K. The sound, which is light to decode, plays on.
- The hardware decoder failed on this stream. Hardware decoders are fast and strict. A stream with an unusual structure can make them give up while a software decoder plays it, slowly but correctly.
- HDR on a screen that does not take it. An HDR channel sent to a TV or monitor without HDR can come out black or washed out. It is rare on IPTV, where most channels are SDR.
- The picture is there, but hidden. Picture in picture closed behind another app, or a radio channel that has no picture at all. Radio and music channels in a playlist look like TV channels and play sound only, by design.
What to do
- Try another version of the channel. If the playlist has the channel in HD and SD, or under two names, the lighter one usually plays.
- Switch the decoder. Hardware to software, or the other way round. Software decoding plays more streams but uses more battery and struggles with 4K.
- Switch the player engine, if the player has more than one.
- Check the format. If the channel is HEVC or 4K and the device is more than a few years old, the device is the limit. Playing the same channel on a newer device confirms it in a minute.
A picture, but no sound
The usual causes, most likely first
- Surround sound the chain does not take. Many channels carry surround sound in the AC-3 or E-AC-3 formats. If the player passes it to a TV or soundbar that cannot decode it, or decodes it to nothing, you get silence. This is the most common case on TV boxes connected to a soundbar or an AV receiver.
- The wrong audio track. Channels can carry several tracks: languages, audio description, a commentary. A track that is silent or not yet listed by the stream gives a silent picture.
- Volume. The player’s own volume, the device’s media volume, a Bluetooth headset still connected in another room.
- The stream has no sound. Some channels drop their audio for a while. If every player and every device is silent on that channel, the provider’s stream is missing it.
What to do
- Pick another audio track in the player’s audio menu, if there is more than one.
- Change the device’s audio output. On Android TV, Google TV and Fire TV, the system sound settings let you change the surround sound output from automatic or passthrough to stereo or PCM. Stereo output decodes on the box and works with any TV.
- Unplug the soundbar to test. If the TV’s own speakers play the sound, the soundbar or the receiver is refusing the format.
- Check the volume on the remote, in the player and in the device’s Bluetooth settings.
Subtitles in place of sound, or over the picture
Not a missing half, but often confused with one: a channel that shows subtitles you did not ask for, or a sound track in the wrong language. Both come from the stream’s own tracks. Pick the track you want in the player’s audio and subtitle menu; a player that remembers a preferred language picks it on every channel that carries it.
When both halves fail in turn
Sound with no picture on one channel and the opposite on another, on the same device, points at the device’s decoders as a whole, often after a system update or on a box that runs hot. Restart it. If it persists, compare with another device on the same channels: if those play, the box is the limit.
The codes for each case
| On screen | Code | Meaning |
|---|---|---|
| This stream uses a format this device cannot decode. | E-PLAY-CODEC | Neither decoder nor engine could play it |
| This channel is not playing, with E-PLAY-NOVIDEO | E-PLAY-NOVIDEO | The stream arrived with no picture the player could show |
| This channel is not playing, with E-PLAY-NOAUDIO | E-PLAY-NOAUDIO | The stream arrived with no sound the player could play |
| Silence or black, no error | none | A track, an output setting or the TV |
Questions that come up
Why does it play on my phone and not on my TV box? Different decoders. A recent phone often has a better HEVC decoder than a TV box that is several years old, and a phone plays sound through its own speaker with no soundbar in between.
Why did it work yesterday? The provider may have changed the channel’s format, often from H.264 to HEVC to save bandwidth. The device did not change; the stream did. Stream info shows the current format.
Does a faster connection help? No. This is decoding, not delivery. A slow connection buffers; it does not leave you with half a channel. For stutters and spinners see why IPTV buffers.
Will a newer player fix it? If the device has no decoder for the format, no player adds one in hardware; software decoding is the only route, and it may not keep up with 4K. If the device has the decoder and one player fails where another plays, the player is the difference.
Sound and picture are out of step. Not a missing half, but close: the sound runs ahead of or behind the lips. On a TV box with a soundbar, the soundbar’s own processing delay is the usual cause, and most soundbars and TVs have an audio delay or lip-sync setting. If it happens on one channel only, on every device, the provider’s stream is out of step.
Adless plays the channels in your own playlist and ships none. The formats are chosen by your provider; the device decides which of them it can decode.
Read next
- IPTV channel won't load: the causes in order A channel that will not start fails in one of six places, from your connection to the provider's server to the device's decoder. How to check them in order, and what each error means.
- Why IPTV buffers: the player, your network or the provider Buffering has three possible sources. Four questions that tell you which one you are dealing with, what to change on your side, and when the only fix is the provider's.
- IPTV on a Fire TV Stick: stopping the buffering A Fire TV Stick buffers IPTV for reasons a phone does not: it sits behind the TV with a weak Wi-Fi antenna, little memory and little storage. The checks in order, from the HDMI extender to the player's buffer.